Scopes and Mounts

5030H	Deluxe 2-piece double screw mount with removable arrestor pin, 1" High for use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5030M	Deluxe 2-piece double screw mount with removable arrestor pin, 1" Medium for use with scopes up to 45 mm lens and dovetails from 9.5 mm - 11.5 mm
5031	Deluxe 2-piece double screw mount, 30 mm High for use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5032	One-piece single screw mount, 1" High for use on Weihrauch air Rifles with drooping barrels. For use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5033	2-piece double screw mount, 30 mm High for use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5034	2-piece double screw extended mounts give 25 mm extension to mounting points. 1" High for use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5035	2-piece double screw mounts with high tensile steel recoil arrestor bolt to suit all weaver and weaver style bases. 1" Medium for use with scopes up to 45 mm lens
5036	One-piece double screw mount, 1" High for use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5037	One-piece double screw mount, 30 mm High for use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5038	One-piece single screw mount with hardened cross pin to suit recoil arrestor grooves on Kodiak and other Webley models as well as the FWB 124 / 127. 1" Medium for use with scope up to 45 mm lens and dovetails from 9.5 mm - 11.5 mm
5038H	One-piece single screw mount with hardened cross pin to suit recoil arrestor grooves on Kodiak and other Webley models as well as the FWB 124 / 127. 1" High for use with scope up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5039	One-piece double screw mount is fully adjustable for windage and elevation. 1" High for use with scopes up to 56 mm lens and dovetails from 9.5 mm - 11.5 mm
5040	One-piece double screw mount with removable arrestor pin, 1" Medium for use with scopes up to 45 mm lens and dovetails from 9.5 mm - 11.5 mm

	Beeman Sport Aperture Sight Take a huge step up by clamping on one of these small but elegant aperture sights. The right side of the mounting dovetail can be fitted exactly by simply tightening hidden precision lock screws onto the male receiver grooves of most adult air rifles. These units allow the sight to be switched from gun to gun (even though different makes), and can be attached to guns which have receiver grooves that are not open to the rear, such as the Webley Hawk or Vulcan air rifles. Securing screws bear against this sights clamping jaw, not against the gun. Positive click micrometer adjustments can be locked securely. The target knobs on the deluxe version are a welcome addition for shooters who prefer the convenience of readily turned knobs. Built of rust proof alloy with a tensile strength of over 85,000 lbs., it is compact and weighs only 1-1/2 oz. Special anodized deep blue-black finish is extremely durable. No machining required--just slip onto receiver grooves and tighten Allen screws with wrench provided. Note: When using an aperture sight barrel, angle must be adjusted to droop downward. Instantly fits air rifles with built-in scope grooves and has easy to use finger adjustable knobs. (FWB, Beeman, HW, Hy-Score, El Gamo, old and new Webley, Winchester, RWS, Geco, Sharp, Marksman, BSA, BSF, etc.)
	Beeman Scope Stop Highly recommended to prevent movement of any scope on spring-piston airguns or stronger recoiling firearms. Just slip on behind position of scope mount and secure with included Allen wrench. Install behind mount: Beeman C1 and P2; Spitfire; all Webley; BSA; Falcon 2, FX-2, Kodiak, Feinwerkbau 124, 127, 300. Install ahead of mount: Beeman P1, Hurricane, 5140.
	Beeman Professional Scope Stop Same function as 5090 unit, but more sophisticated. Multiple part design clamps firmly onto sides of gun's dovetail and has a large stop pin as well. Beautifully made, beautifully blued--you'll be delighted if you appreciate extra quality and fine details. Fits only Beeman R series rifles, Beeman/HW, Weihrauch air rifles, and Marksman 60-61, 28, 40, 55, 59 and 70 Series, Diana.
	Rear Sight Replacement Plates These plates neatly replace the rear sight when scope or receiver sights are installed. A better arrangement than using filler screws as the plates also cover an unsightly hole or groove that is revealed when rear sight is removed. Uses existing rear sight screw holes. Screws provided. Cat. Number 5150--Fits Beeman R1, R9, RX. Blued gun steel. Cat. Number 5151--Same as above, but fits Beeman R7/R8, HW30, HW50.
	FWB Intermount This factory unit raises the scope mount or aperture sight up to a "heads-up" position that is most suitable for running target and which is also preferred by many for other forms of shooting. Fits FWB 300S Match, Mini-300, Running Boar, etc., rifles. Especially for use with Beeman 66R and 66RL scopes. Also provides extra room for easier loading. Cat. Number 5435.
	Air Pistol Scope Bases Standard anodized aluminum scope bases precisely machined to fit most air pistols generally mounted with scopes. Requires drilling and tapping gun. A two hand hold is recommended when firing scoped pistols. Can be installed by Beeman gunsmiths. Cat. Number 5140--FWB 65, 80, 90, LP-53, S&W 78G-79G, Daisy 790. (See screws 5143.) Cat. Number 5142--HW70A, HW70S Note: 5142 does not require drilling and tapping, use existing rear mount screw holes.
	Pistol Scope Base Filler Screws Should you wish to remove a Beeman Mounted scope base, these custom screws will make the holes seemingly vanish. They have precision micro-heads for exact depth. CAUTION: Ordinary plug screws can damage gun. Blued. Cat. Number 5143--Use only for 5140 base. Rear Sight Filler Screws To fill holes left when rear sight is removed for scope use. Cat. Number 5080--For Beeman R series, Beeman/HW and Weihrauch rifles.
	Frontsight Insert Sets For rifles only. Cat. Number 5749--Rifle Annular for FWB 300S. Set of eight.
	Cat. Number 5770--Beeman/HW foresight insert set. Fits Beeman R series plus HW models which take interchangeable inserts. Set of five. Note: Items shown are not to scale nor complete sets.
	Cat. Number 5949 Feinwerkbau 65 only (in recoil mode). Set of four. High.
	Frontsight Insert Sets For FWB 65 pistols. For Feinwerkbau 65 (in recoilless mode), and other FWB match pistols. Set of four. Low. Cat. Number 5939